Answering An Intercom Page; Room/Baby Monitor - Uniden DCT756 Owner's Manual

Answering an Intercom Page

When the intercom page tone sounds, the display shows the ID of the sta-
tion that is paging.
From the handset, press [ /fl ash] or [xfer/intercom]. If AutoTalk is on,
the handset automatically answers the page when you remove the hand-
set from the cradle.
From the DCT7565 base, press [int'com/xfer], or [speaker].
To hang up an intercom page from the handset, press [ ]. To hang up an intercom page from the DCT7565 base,
press [int'com/xfer].

Room/Baby Monitor

This feature allows you to monitor sounds in another room. Place a hand-
set (or the DCT7565 base) in the room you wish to monitor; it will func-
tion as a microphone. Another station can be set to function as a remote
speaker, allowing you to monitor sounds in the room.
1. Press [menu/clear] and enter the ROOM MONITOR menu. TO
ROOM MONITOR appears.
2. Select the station you want to monitor by
using [ ] or [ ].
3. Press . ROOM MONITOR appears, and you hear
sounds in the room where the station is installed.
4. To turn off the Room Monitor, press [ ] or return
the handset to the cradle.
Handset #2 Handset #2
at remote location at remote location
44
One-Way Broadcast One-Way Broadcast
Handset #1 Handset #1
near child near child