Land Pride RCP2660 Operator's Manual page 43

Section 4: Operating Procedures
Unhook Quick Hitch Arrangement
NOTE: This arrangement does not apply to cutters
utilizing the Kubota Stabilizer Kit.
1. Refer to Quick Hitch Operator's Manual for
unhooking instructions specific to your Quick Hitch.
2. Restart tractor and lower 3-point lift arms until auto-
lock hooks are below implement hitch pins and upper
hook is below implement upper hitch point.
3. Slowly drive tractor forward several feet while
watching for interferences with the cutter and tractor.
4. Place gear selector in park or set park brake, lower
3-point arms down, shut tractor engine off, and
remove switch key before dismounting tractor.
Relocate Slow Moving Vehicle Sign
Figure 4-3
11/2/18
Table of Contents
Relocate Slow Moving Vehicle Sign
Refer to Figure 4-3:
1. Remove slow moving vehicle sign (#1) from
mounting bracket on the back of the Parallel Arm
Rotary Cutter.
2. Reinsert slow moving vehicle sign in the mounting
bracket on the back of your tractor.
37625
Parked Position
Figure 4-4
RCP2660, RCPM2660, RCP3060 & RCPM3060: Parallel Arm Rotary Cutter: 316-111M:
39