Selecting Your Greeting; Setting A Security Code Or Personal Identification Number (Pin) - Uniden CEZAI 998 Series Owner's Manual

2) Start recording your message. You will have 30 seconds, and the message counter will count down.
When you are finished recording your greeting, press [greet], [
hear a confirmation tone, and then your greeting plays back for you.
Note:
• Position yourself as close to the base as possible and speak clearly when recording your greeting.
• If you make an outside call or a call is received during the new greeting recording, the operation is
canceled.
• The greeting must be more than two seconds long, or it will not be recorded.
• To delete the personal greeting, press
announces "Greeting has been deleted."

Selecting Your Greeting

You can switch back and forth between your personal greeting and the pre-recorded system greeting. With
the phone in standby, press [greet]. Then press [greet] again while the outgoing greeting is played. This
switches between the prerecorded greeting and the personal greeting. After your greeting selection plays
back, a confirmation tone is heard.

Setting a Security Code or Personal Identification Number (PIN)

To play your messages from a remote location outside of your home, you will need to enter a two-digit
Security code or Personal Identification Number (PIN).
1) Press [menu/set] on the base.
2) Press [select/-] to move the pointer to select SECURITY
CODE, and then press [menu/set].
[ 4 9 ] S E T TI N G U P T H E A N S W E R I N G M A C H I NE
[ ]
(delete) while the message is playing. The system
] (play/stop) or [menu/set]. You will
w w w . u n i d e n . c o m