Display Description; Initial Use; Basic Settings - Sanitas SFT 75 Instructions For Use Manual

5. Display description

Date display
1
Time display
2
Measurement in progress
3
Measuring unit
4
Celsius/Fahrenheit
Object temperature mode
5
Temperature value
6
Button tone symbol
7
Battery level
8
Memory space number display
9
Forehead temperature mode
10
Ear temperature mode
11

6. Initial use

The batteries are already inserted in new devices. Before first use, re-
move the protruding plastic insulating strip from the battery compart-
ment. The multi functional thermometer will then switch on automatically.

7. Basic settings

You can adjust the following basic settings on the multi functional ther-
mometer: Temperature unit (Celsius/Fahrenheit), date and time.
1. Press the ON/MEAS button
2. Hold down the S button for five seconds.
1 2
11
10
9
to switch on the device.
3. The current temperature unit setting flashes on the
display. Use the S button to select the temperature
unit (°C or °F). Use the M button to confirm.
4. The year display flashes on the display. Use the
S button to select the current year. Use the M
button to confirm.
3
5. The month display flashes on the display. Use
the S button to select the current month. Use
4
the M button to confirm.
5
6. The day display flashes on the display. Use the
6
S button to select the current day. Use the M
button to confirm.
7
8 7. The hour display flashes in the display. Use the S
button to select the current hour. Use the M
button to confirm.
8. The minute display flashes in the display. Use
the S button to select the current minute. Use
the M button to confirm.
9. The device stores the basic settings and automatically
switches off.
Activating/deactivating the button tone
You can activate/deactivate a button tone on the device.
When the button tone is activated, a beep sounds every time a button
is pressed and after every measurement.
To activate the button tone, ensure that the device is switched on and
then briefly press the S button. The loudspeaker symbol
the display. To deactivate the button tone again, press the S button once
more. The loudspeaker symbol disappears from the display.
5
appears on