Installing A Replacement Battery - Uniden DMX 778 Series Owner's Manual

Installing a Replacement Battery

Follow the steps below if you need to replace a battery.
1) Press down on the handset
battery case cover (use the finger
indention for a better grip) and
slide the cover downward to
remove.
2) Remove the existing battery and
unplug the connector from the
jack.
3) Plug the battery connector (red,
white & black wires) into the jack
inside the battery compartment.
(The connector notches fit into
the grooves of the jack only one
way). Match the wire colors to
the polarity label in the battery
compartment, connect the
battery and listen for a click to
insure connection.
w w w . u n i d e n . c o m
•Use only the Uniden
(BT-0001) rechargeable
battery pack supplied
with your cordless
telephone.
•If you try to use the
phone when the battery
case cover is open, you
will hear beep and see
Please close the
battery cover
display. Close the
battery cover tightly.
N o t e o n P o w e r S o u r c e s [ 7 6 ]
note
on the