Call Waiting - Uniden BT229 User Manual

Call Waiting

To use this feature, you must subscribe to Call Waiting through your service
provider, and your phone must support the hands-free profile.
To put your current call on hold and switch to a waiting call, press and hold
►
beeps (about  seconds). When you release the button, you'll be connected to the waiting call.
(Press and hold
Up
To hang up your current call and switch to a waiting call: press and hold
►
seconds. Wait until you hear  beeps, then release the button.
Voice-activated dialing
To use this feature, your phone must support voice dialing, and
To activate voice dialing, make sure your phone is in standby. Then, press and hold
►
you hear a beep (about  seconds).
Use your pre-programmed voice commands as you would with your phone. (For best results, try
►
recording your voice tags through your headset. )
again to switch back to the original call.)
all voice commands must already be programmed.
until you hear 
Up
for about 
DoWn
until
MFB
9