Using The Multipoint Function; Pairing To More Than One Phone; Using Both Phones - Uniden BT229 User Manual

Using the Multipoint Function

The headset supports simultaneous connection with  mobile phones with full control of
each one. (This feature may not be compatible with some mobile phones.)

pairing to more than one phone

Pair the headset to the first phone following the instructions on page 6. When you hear a
high-pitched, short double-beep, pair the headset to the second phone.

Using both phones

The headset stays connected to both phones until a call comes in. If you answer the call, the
►
headset automatically disconnects from the other phone while the call is active. When you hang
up, the headset automatically reconnects to the other phone.
Only one phone at a time can be on an active call.
►
The headset plays a different ring tone for each phone so you know which one is ringing. To
►
answer the incoming call, press
All the button functions remain the same for the first phone (the one you paired first).
►
To use last number redial on the second phone, press and hold
►
(When you hear a beep, release the button.)
To activate voice dialing on the second phone, press and hold
►
you hear a beep, release the button.)
10
as usual.
MFB
for about  seconds.
DoWn
for about  seconds. (When
Up