Table of Contents
Advertisement
1)
Make sure the headset is powered off and the power adapter is not connected (you can't use the
headset while it's charging).
)
Press and hold
MFB
then release. The headset is in pairing mode and should be visible to other Bluetooth devices.
)
On your phone, start a search for Bluetooth headsets or handsfree devices. (This process may
take several seconds, and it will be different for each phone; see your phone's manual for
detailed instructions.)
Your phone should discover a device called a BT229 or BT229 headset, When your phone asks if
)
you want to pair with this device, answer yes.
5)
When your phone prompts you for a PIN code or password to pair with the BT9 enter
6)
When the headset is paired, the blue LED flashes twice every 5 seconds; your phone might also
display a confirmation message.
If the blue LED flashes once every 5 seconds, the headset is
until the LED flashes alternating red and blue (approximately 6 seconds),
not paired. Try the pairing procedure again.
.
0000
5
Advertisement
Table of Contents
