Table of Contents
Advertisement
TP48200A-HT19C4-1 & TBC300A-TCA2
Installation Guide
Changing Cable Connections for the Maintenance Socket
Step 1 Remove the cover from the maintenance socket.
Step 2 Remove the N wire from the residual current device (RCD).
Step 3 Remove the L1 wire from the UT terminal.
Step 4 Connect the removed N wire to the position where the L1 wire was connected to the UT
terminal, and connect the removed L1 wire to the position where the N wire was connected to
the RCD.
Figure 7-12 Changing cable connections for the maintenance socket
Step 5 Reinstall the cover for the maintenance socket.
----End
Issue 01 (2014-03-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Installing Cables
63
Advertisement
Table of Contents
