Table of Contents
Advertisement
Using SuperFreeze, SuperCool and DynaCool
DynaCool function
When the dynamic cooling function
(DynaCool) is not switched on, the
natural circulation of air will cause
different temperature zones in the
refrigerator as the cold, heavy air sinks
to the lowest section. Make use of the
different temperature zones when
placing food in the refrigerator (see
"Using the refrigerator efficiently").
However, if you are placing a large
amount of food in the refrigerator at any
one time, e.g. after your weekly shop, it
is a good idea to switch on DynaCool.
This way you can distribute the
temperature inside the appliance to all
areas more evenly so that all the food in
the refrigerator section will be chilled to
about the same degree.
The temperature can be set as usual
with the temperature control.
DynaCool should also be switched on
when:
– the ambient temperature in the room
is high, i.e. above 30 °C, and
– the room humidity level is high.
With DynaCool selected, the fan is
operating continuously: When the
compressor switches on, the fan also
switches on automatically.
Useful tip: As the energy consumption
is increased when DynaCool is
activated, it should be switched off
under normal conditions.
To save energy, the fan switches off
automatically when the door is open.
Switching a function on or off
Touch the temperature display for the
section you want.
3
°C
OK
Refrigerator section display - DynaCool,
SuperCool
-18
°C
OK
Freezer section display – SuperFreeze
The current temperature and and
or appear in the display.
Touch the symbol for the required
function.
– If the symbol lights up orange, the
function is selected.
– If the symbol lights up white, the
function is deselected.
Touch
to confirm your entry.
OK
Or wait approximately 8 seconds
after the last touch of a sensor. The
setting will then be adopted
automatically.
The SuperCool, SuperFreeze, or
DynaCool functions are switched on or
off.
29
- Quick Links:
- Guide to the Appliance
Hide quick links:
Advertisement
Table of Contents
