Miele KFN 28032 D WS Operating And Installation Instructions page 65

Message
 lights up red in the
display, a fault code F
with numbers appears
and an alarm sounds.
Possible cause and remedy
There is a fault.
 To switch the alarm off touch  in the display.
 Call Miele.
To report the fault you need the fault code and also
the model number and serial number of your
appliance. You can access these in the display.
 To do this touch  in the display.
The appliance data required will be shown in the
display.
Confirm with
OK
the fault code will be shown again in the display.
The appliance can be switched off directly from the
fault code display.
 Touch .
There is an appliance fault: This display will override
any settings which have just been selected.
An appliance fault has priority over any current door
and/or temperature alarms in the display.
Problem solving guide
to exit the information display, and
65