Dynacool Function - Miele KFN 37452 iDE Operating And Installation Instructions

Using Super cool, Super freeze and Dynamic cooling

DynaCool function

When the DynaCool function is not
switched on, the natural circulation of
air in the appliance will cause different
temperature zones in the refrigerator as
the cold, heavy air will sink to the
lowest section of the appliance. You
should bear this in mind when placing
food in the appliance (see "Storing food
in the refrigerator section").
However, if you are placing a large
amount of food in the refrigerator at any
one time, it is a good idea to switch on
DynaCool. This way you can distribute
the temperature inside the appliance to
all areas more evenly so that all the
food will be chilled to about the same
degree.
The temperature is set as normal with
the temperature control.
DynaCool should also be selected
when:
– the ambient temperature in the room
is high (above approx. 30 °C), and
– the room humidity level is high.
32
Switching on Dynamic cooling
 Touch the sensor for the refrigerator
section.
The symbol for the refrigerator section
is highlighted in yellow.
 Touch the Dynamic cooling sensor so
that it is highlighted in yellow.
The fan is ready: when the compressor
switches on, the fan also switches on
automatically.