Attach The Switch To A Pole Or Table Leg - NETGEAR GS408EPP Hardware Installation Manual

8-Port Easy Mount Gigabit Ethernet PoE+ Smart Managed Plus Switch GS408EPP
6. Insert the mount's locking tab and hook into the notches on the back or bottom of
the switch.
7. Slide the switch into the mount.

Attach the switch to a pole or table leg

The switch comes with straps and a mount. You can attach the straps to a pole or table
leg, attach the mount to the straps, and click-attach the back or bottom of the switch to
the mount.
To attach the switch to a pole or table leg:
1. Attach the straps to the mount by pulling the straps through the openings in the
mount.
2. Attach the straps with the attached mount to the pole or table leg.
Installation 22 Hardware Installation Guide