Table of Contents
Advertisement
Operating
Setting maximum brightness
DPX-620III 6-Ch.
28
dimmer pack
Proceed as follows to set the maximum brightness for the dimmer channels:
1.
Press [MENU] to open the main menu. Press [UP] or [DOWN] to select the 'MaxLevel'
menu.
2.
Confirm with [MENU].
ð The display shows 'MaxLevel' .
3.
Use [UP] or [DOWN] to select between 'All' (all channels get the same maximum bright‐
ness) and 'Single' (each channel can get an individual maximum brightness).
Confirm with [MENU].
4.
In 'All' mode: Use [UP] or [DOWN] to select the maximum brightness for all channels in a
rage 70 % ... 100 %. Confirm with [MENU].
In 'Independent – Single' mode: Use [UP] or [DOWN] to first select the channel whose
maximum brightness is to be set. Confirm with 'MENU' . Then select the maximum
brightness for this channel from a range 70 % ... 100 %. Confirm with [MENU] and repeat
the procedure for all channels.
5.
Press [ESC] to return to the main menu.
Advertisement
Table of Contents
