Table of Contents
Advertisement
Device behaviour on missing
DMX signal.
Proceed as follows to specify how the unit behaves when the DMX signal is missing.
1.
Press [MENU] to open the main menu. Press [UP] or [DOWN] to select the 'DMX Fail'
menu.
2.
Confirm with [MENU].
ð The display shows 'Dmx fail' .
3.
Use [UP] or [DOWN] to select between options
'LastHold' : Last setting is retained
n
'Analog' : The analogue control signal (input [ANALOG]) is analysed
n
'Progr:01-12' : The built-in automatic programmes are executed
n
Confirm with [MENU].
4.
In 'Progr:01-12' mode: Use [UP] or [DOWN] to select the duration of each step (and thus
the programme speed) in the range 0.005 s ... 30.0 s.
5.
Press [ESC] to return to the main menu.
Operating
DPX-620III 6-Ch.
27
dimmer pack
Advertisement
Table of Contents
