Backlight Button; Lock Button - Vello ShutterBoss II User Manual

CONTROLS

Backlight Button

Press the button to activate the LCD's
backlight. It will remain lit for about 6
seconds.

Lock Button

The LOCK button locks all controls except
the remote's shutter release button. Press
and hold the LOCK button for about 3
seconds, until the icon appears on the
LCD. To unlock, press and hold the LOCK
button for about 3 seconds, until the
disappears.
Important: When you're adjusting settings
on the remote, make sure the
displayed on the LCD, and that the controls
are not locked.
8
Timer Start/Stop Button
The Timer Start/ Stop button starts
and stops any of the timer functions and
sequence of shots.
Reset
Reset clears all the timer settings to
00:00'00" and defaults the interval to 1
second, and the shot count to 1.
To reset, press the LOCK and TIMER
START/STOP buttons at the same time.
icon
icon is not
RESET