Vello ShutterBoss II User Manual page 15

INTV – Timed Interval
INTV is the time between shots in the
sequence. You can select intervals from 1
second to 99 hours 59 minutes 59 seconds,
in one-second increments. If you are using a
flash, be sure to set an interval that is longer
than your flash recycle time.
Important: When setting the interval,
you must add the exposure plus interval
time together. For example, if you want 10
seconds between each shot, then
10 second exposure time (LONG)
+ 10 seconds between each shot
= 20 INTV,
so the interval value would be 20 seconds.
1. Press the / arrows to position the
cursor beneath INTV.
2. Press the SET button to change the
interval time settings. The time increments
will blink.
3. Use the / arrows to move between
hours, minutes, and seconds.
4. Use the
/ arrows to change the time
increments.
5. Press the SET button to confirm.
6. Press TIMER START/STOP to begin the
timer.
Cursor
SELF LONG INTV No. BEEP
Hours Minutes Seconds
15