H3C SecPath M9000 NSQM1MBFEA0 Quick Start Manual

资料版本: 6PW102-20180530
H3C SecPath M9000 NSQM1MBFEA0 interface
1 Identifier
The module identifier NSQM1MBFEA0 is in the upper right corner of the front panel.
2 Introduction
The NSQM1MBFEA0 interface module is developed for H3C SecPath M9000 gateways. It provides
two subcard slots. By using the interface module with M9000 high-performance service modules, the
M9000 gateway is capable of providing security for 100G networks.
3 Specifications
Figure 1 Front panel
(1) Captive screw
(3) Subcard slot 1
Table 1 Module specifications
Item
Dimensions (H × W × D)
SDRAM (DDR3)
Power consumption
Net weight
Hot swapping
Ambient temperature
Ambient humidity
Compatible device models
module
(2) Ejector lever
(4) Subcard slot 2
Specifications
40 × 399 × 354 mm (1.57 × 15.71 × 13.93 in)
2 GB
41W to 62W
2.90 kg (6.39 lb), including the ejector lever
Supported
•
Operating: 0°C to 40°C (32°F to 104°F)
•
Storage: –40°C to +70°C (–40°F to +158°F)
•
Operating: 5% RH to 95% RH, noncondensing
•
Storage: 5% RH to 95% RH, noncondensing
•
M9006 gateway
•
M9010 gateway
•
M9014 gateway
i
BOM: 3123A1N2