Page 1
FLEXIBLE TTL ROD FOR CANON / NIKON FLASHES OCS-FAC / OCS-FAN User Manual...
Page 2
THANK YOU FOR CHOOSING VELLO The Vello OCS-FAC/ maintaining all of the TTL flash red-eye when shooting in OCS-FAN is a flexible functionality of the camera. dim light. The gooseneck rod with an integrated design of this TTL rod makes...
Page 4
PRECAUTIONS • Exercise caution when using the Flexible TTL Rod. Do not bend the rod more than 180° or rotate the rod’s hot shoe. Doing so may damage the rod.
Page 5
• Switch off all devices • This device is not water- • Do not use the device (camera and flashes) before resistant. Do not immerse in conditions of extreme adding or removing a flash in or expose to water, rain, heat, severe cold, or high unit.
MOUNTING ON THE CAMERA 1. Loosen the locking wheel by Note: Make sure the TTL turning it counterclockwise. rod’s mounting foot is facing the right direction, or your 2. Position the TTL rod’s flash will not be able to mounting foot with the communicate with your Lock indicator facing the camera.
MOUNTING THE FLASH 1. Make sure that both the 3. Use your flash’s locking camera and flash are mechanism to secure the turned off. flash to the TTL rod. 2. Set the camera and rod 4. Turn on the flash and the assembly onto a flat, camera.
Page 8
SHOOTING WITH THE FLEXIBLE TTL ROD Bend the rod to position your flash at the desired angle. Be careful not to bend the rod beyond 180° or rotate the rod’s hot shoe. Doing so may damage the rod. When shooting with the TTL Flexible Rod, hold your camera with one hand while holding the TTL rod with the other.
ONE-YEAR LIMITED WARRANTY This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or...
Page 11
To obtain warranty coverage, contact the Vello Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Vello along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.