Page 2
TABLE OF CONTENTS TIME Clock 2- 6 Sleep Timer Time Zone OPTION Introduction for the terminal Language board function 10-11 Country Blue Screen Basic operation and source Daylight Saving Restore Factory Default Channel LOCK Auto Tuning DTV Manual Tuning Lock System ATV Manual Tuning Set Password Programme Edit...
Page 8
REMOTE CONTROLLER 3. 0-9: Press0~9 to select a TV channel directly while watching TV. The channel will change after 2 seconds. Atenna cable for enter in page number in teletext mode and soon. 4. ATV/DTV: Enters ATV and DTV channel directly. previouse MTS : Enter...
Page 9
REMOTE CONTROLLER 19. FREEZE: Picture paused. Correspond to the coloured operations within the menus. 31. GUIDE:Launches the EPG (Electronic Program Guide) 32. SUBTITLE:To display subtitle in TV mode. 33. LIST: To enter program list. 35. CANCEL: When a page is selected in TV/RADIO GUIDE Angle...
Page 10
REMOTE CONTROLLER 37. A-B Select and play the preferable paragraph of DVD program by pressing this key twice at the beginning and of it. 38/39/40/41/42. ENTER When the DVD menu or system menu display on the TV screen and wait for selection, press these buttons to select an item in a menu.
Page 11
USER GUIDANCE INFORMATION VOL+ VOL- MENU SOURCE -10-...
Page 12
USER GUIDANCE INFORMATION INPUT INPUT OPTICAL Digital signal output OPTICAL OUTPUT Av1 /Av2 (INPUT) Av3 (INPUT) YPBPR1/YPBPR2 HDMI1/HDMI2 AC POWER input -11-...
Page 13
BASIC OPERATION Switch on the main power on the back of panel. ENTER button -12-...
Page 18
MENU OPERATION Daylight saving Daylight saving select Daylight Saving Time -17-...
Page 19
-Press D.Setup button to activate the DVD player OSD menu: -Press button to move and high light between different sub menu. Press ENTER button to enter the high lighted sub-menu. -Press DVD SETUP button to exit the OSD menu. System Setup NOTEP:PAL format is generally used for TVs in P-SCAN.
Page 20
4.3PS(Normal) 4.3LB(Normal) below the picture. 16:9(Wide) NOTE: Rating: Note: The default password is 0 0 0 0 . This default password( 0 0 0 0 ) is always active even the password has been changed. -19-...
Page 21
Default setting - press ENTER button to restore factory default Language Setup D.Setup Press button to enter the DVD OSD menu. -OSD LANGUAGE Use navigation buttons to select the OSD LANGUAGE setup icon. Press Enter button to confirm. OSD language in this model is set to English. -Audio language Use navigation buttons to select the AUDIOLANG setup icon, press ENTER button to confirm.There are 6 &...
Page 22
Subtitle Language Use Navigation buttons to select the SUBTITLE LANG setup icon and press ENTER button to confirm. & buttons to toggle between different languages There are 6 languages for you selection, press (ENGLISH/ GERMAN/SPANISH/FRENCH/PORTUGUESE/ARABIC /OFF) Press ENTER button to confirm. NOTE : If the selected language is not included in your DVD discontent , it will select the default language of the disc automatically .
Page 23
saturation FRONT You can set the volume output level of the front speaker in this option. -22-...
Page 24
DOLBY DIGITAL SETUP Dynamic Range Dynamic Range -When switch the compress mode to Audio output, adjust the compress ratio for different effect. When selected FULL, the peak signal value is highest. Dual Mono -You can select four different audio output STEREO MONO L MONO R MIX MONO The audio out description on these selection is shown in the table below .
Need help?
Do you have a question about the Qvision L26V10A-AU and is the answer not in the manual?
Questions and answers