Do you have a question about the E32S12A and is the answer not in the manual?
Questions and answers
Dianne
February 28, 2025
no remote and menu button not working
1 comments:
Mr. Anderson
February 28, 2025
The manual does not provide specific troubleshooting steps for the menu button on the SONIQ E32S12A. However, you can try the following general steps:
1. Check for Physical Damage – Ensure the button is not stuck or damaged. 2. Power Cycle the TV – Unplug the TV from the power source, wait a few minutes, and plug it back in. 3. Use Alternative Buttons – Some TVs allow access to the menu using a combination of other buttons (e.g., pressing and holding the "Volume" or "Input" buttons). 4. Connect a USB Keyboard – The TV may support a USB keyboard, allowing navigation using arrow keys. 5. Factory Reset – If accessible, try resetting the TV to its default settings through the side panel buttons. 6. Contact Support – If none of the above steps work, consider reaching out to SONIQ support for further assistance.
If you have access to a universal remote or a mobile app that supports IR control, those might also help navigate the menu.
Need help?
Do you have a question about the E32S12A and is the answer not in the manual?
Questions and answers
no remote and menu button not working
The manual does not provide specific troubleshooting steps for the menu button on the SONIQ E32S12A. However, you can try the following general steps:
1. Check for Physical Damage – Ensure the button is not stuck or damaged.
2. Power Cycle the TV – Unplug the TV from the power source, wait a few minutes, and plug it back in.
3. Use Alternative Buttons – Some TVs allow access to the menu using a combination of other buttons (e.g., pressing and holding the "Volume" or "Input" buttons).
4. Connect a USB Keyboard – The TV may support a USB keyboard, allowing navigation using arrow keys.
5. Factory Reset – If accessible, try resetting the TV to its default settings through the side panel buttons.
6. Contact Support – If none of the above steps work, consider reaching out to SONIQ support for further assistance.
If you have access to a universal remote or a mobile app that supports IR control, those might also help navigate the menu.
This answer is automatically generated