Table of Contents
Advertisement
Page 17
~ 3 5 - J = ' - ~ = ~ 3
Pictorial
6
( )
Connect a 2-1/4"
wire from lug 1 of tube
( ) D2. Connect a silicon diode from lug 1
socket V1 (S-1) to lug 2 of lamp socket
(5-3) to lug 3 (NS) of terminal strip Q.
S (S-1).
The positive (+) lead goes to lug 1. Avoid
overheating the diode lead when soldering.
( ) C1. Connect the 100 pfd electrolytic ca-
pacitor from lug 1 of terminal strip P
(S-1) to lug 1 of terminal strip Q (NS). The
( ) Dl. Connect a silicon diode from lug 2 (NS)
positive (+) lead goes to terminal strip Q.
to lug 3 (S-2) of terminal strip Q. The
positive (+) lead goes to lug 3.
( ) R4. Connect a 5.6 KS2 (green-blue-red)
2 watt resistor f r o m lug 2 of terminalstrip
( ) R2. Connect a 10
(brown-black-orange)
P (S-2) to lug 1 of control M (S-1).
2 watt resistor from lug 1 (NS) tolug 2 (NS)
of terminal strip R.
( ) R6. Connect a 22 K C 2 (red-red-orange)
1/2 watt resistor from lug 2 of control M
( ) R1. Connect a 10 KSt (brown-black-orange)
(S-1) to lug 1 of control N (S-1). Use
2 watt resistor from lug 2 of terminalstrip
sleeving on the lead to control N.
R (NS) to lug 1 of lamp socket S (S-2).
Advertisement
Table of Contents
