•
Press and release the ALARM button once to view alarm time.
•
Press and release the ALARM button again to activate the alarm.
Bell icon appears.
•
Press and release the ALARM button again to deactivate the alarm.
The bell icon disappears.
•
Press and release the SNOOZE/LIGHT button to silence alarm for 9
minutes.
•
Zz will show.
•
When in snooze mode, press ALARM to stop alarm for one day.
Note: The alarm is crescendo sound. The alarm will sound for 2 minutes and
then shut off completely.
Charge a smart phone, camera or other devices when the forecast station is
plugged into a power outlet with the included power adapter.
NOTE: This is a power-output charging port. It does not supply power to the
forecast station.
Connect your external device's USB charging cable (not included) to the
•
USB charging port.
Charging times will vary.
•
USB Power Output: 1A maximum current. Charge 1A devices or
•
devices that are self-regulating.
The moon phase is based on the year, month and date set (manually or by
the WWVB signal). These are the moon phases.
BACKLIGHT AND PROJECTION INTENSITY (TOGETHER)
Press and release the SNOOZE/LIGHT button to adjust the brightness of the
backlight and projection image (together):
•
ON High intensity
•
ON Low intensity
•
OFF
Note: When the Adapter is NOT in use, the High/Low/On/Off features are not
available.
616-146Av3
ACTIVATE / DEACTIVATE TIME ALARM
SNOOZE (Silences alarm temporarily)
USB CHARGE PORT
MOON PHASE
http://www.lacrossetechnology.com/support/
Alarm
Bell Icon
Page | 3