Setting the alarm and activating the alarm are separate actions.
1. Hold the ALARM button for 5 seconds to enter alarm time set
mode.
2. The letters "AL" will replace the seconds and the alarm hour
will flash.
3. Press the ALARM button to confirm and move to the minutes.
4. Press the + or - buttons to adjust the alarm minutes.
5. Press the ALARM button to confirm. After 5 seconds the clock
will default to regular time mode.
Normal Time Display
Activate/Deactivate Time Alarm
Press the ALARM button once to enter alarm mode.
•
The letters "AL" will replace the seconds
Press the ALARM button again to activate the alarm.
•
Once activated, the bell icon appears.
Press the ALARM button again to deactivate the
•
alarm. The bell icon will disappear.
Snooze (Silences alarm temporarily)
•
When alarm sounds, press the SNOOZE button to silence the
alarm for 10 minutes.
•
The snooze icon Zz will flash.
In snooze mode, press the ALARM button to stop alarm for
•
one day.
Note: The alarm is crescendo sound. The alarm will sound for 2
minutes and then shut off completely if no buttons are pressed.
617-1485Bv2
Set Time Alarm
www.lacrossetechnology.com/support
Alarm Mode
Alarm
Bell Icon
Page | 4