Download Print this page

Activate/Deactivate Time Alarm; Snooze Alarm; Usb Charge Port - La Crosse Technology C86224 Faqs

Hide thumbs Also See for C86224:

Advertisement

Weekend- Will only alarm Saturday and Sunday when active. (Clock icon with 2 lines
below)
• Press and release the ALARM button to view alarm time.
• With alarm time showing, hold the ALARM button for 3 seconds to enter alarm settings.
• Set the time then select alarm type: (Single alarm, Mon-Fri alarm, or Weekend alarm)
• Setting and activating the alarm are separate functions.
Set Alarm:
1. Press and release the ALARM button to view alarm time.
2. With alarm time showing, hold the ALARM button for 3 seconds to enter alarm time set
mode. Press the +/- button to adjust the alarm hour.
3. Press the ALARM button to confirm and move to the minutes. Press the +/- buttons to
adjust the alarm minutes.
4. Press the ALARM button to confirm and move to alarm type. Use the +/– to select
SINGLE, MON-FRI or WEEKEND alarm. Press the ALARM button to confirm and exit.
Note: This is a crescendo alarm. It will sound for two minutes then shut off completely if no
buttons are pressed.

Activate/Deactivate Time Alarm

• When you finish settings, the alarm is active.
• From the normal time display, press and release the ALARM button to view alarm.
• Press and release the ALARM button to deactivate or to activate the alarm.
• When active the alarm clock icon will show.
• The clock icon will not show if the alarm is not active.

Snooze Alarm

• When the alarm sounds, press the SNZ/LIGHT button. The alarm will be silent for the
preselected snooze duration. Snooze duration is set in the
• SNOOZE - duration will show, and the snooze time will count down.
• When the alarm sounds again, the SNOOZE - 0 will flash.

USB Charge Port

Explanation: The alarm clock has two integrated USB charging ports that will charge a
device when operating on AC power.
Note: We have included a USB to Lightning USB or Micro USB cable for your
convenience.
Charge devices that self-regulate.
• Do not charge multiple devices from the same USB port.
• For Tablets and other high power devices, use the USB port on the right (2 Amp).
• Must operate clock with power cable to charge other devices.
• Plug your device into one of the USB ports on the front of the clock.
La Crosse Technology, Ltd
program
menu.
Page 5

Advertisement

loading