Set Time Alarm; Activate/Deactivate Time Alarm - La Crosse Technology W88723V2 Faqs

5. Press SET to confirm and move to the minutes. The MINUTES will flash. Press the + or -
button to choose the minutes.
6. Press SET to confirm and move to the year. The YEAR will show. 2019 will flash. Press
the + or - button to change the year.
7. Press SET to confirm and move to the month. The MONTH will show. Three letter
Month will flash. Press the + or - button to change the month.
8. Press SET to confirm and move to the date. DATE will show. Date number will flash.
Press the + or - button to change the date.
9. Press SET to confirm and move to the temperature unit. TEMP °F will show. ̊ F will flash.
Press the + or - button if you prefer °C (Celsius).
10. Press SET to confirm and exit.

Set Time Alarm

Set Alarm Time
1. Hold the ALARM button for 3 seconds to enter alarm time set mode. The alarm hour
will flash. Press the + or - buttons to set alarm hour
2. Press the ALARM button to confirm and move to the minutes. The alarm minutes will
flash. Press the + or - buttons to set the minutes.
3. Press the ALARM button to confirm and move to snooze duration. The snooze time will
flash and start at the pre-set of 10 minutes. The date area will read "SNOOZE"
4. Press + or - buttons to set snooze duration. Increase or decrease in 5 min intervals up
to 120 min.
5. Press and release the ALARM button to confirm and exit.
Note: Alarm is crescendo sound. When the alarm sounds, it continues for 2 minutes and
then shuts off completely.

Activate/Deactivate Time Alarm

Deactivate Alarm:
La Crosse Technology, Ltd Page 4