ABB GE Power Break II Installation Instructions Manual page 7

7
Long Phillips
Screws &
External Tooth
Lock Washer
—
Figure 23: Electric Operator Diagram
These instructions do not cover all details or variations in equipment nor do they provide for every possible contingency that may be
met in connection with installation, operation, or maintenance. Should further information be desired or should particular problems
arise that are not covered sufficiently for the purchaser's purposes, the matter should be referred to the ABB Inc.
— —
ABB Inc. GE is a trademark of GE. Manufactured
305 Gregson Drive by ABB Inc. under license from GE.
Cary, NC 27511.
electrification.us.abb.com
Split
Lock
Washer
Hex Screws
—
We reserve the right to make technical
changes or modify the contents of this
document without prior notice. With
regard to purchase orders, the agreed
particulars shall prevail. ABB Inc. does not
accept any responsibility whatsoever for
potential errors or possible lack of
information in this document.
Silver Bottom Plate
We reserve all rights in this document and
in the subject matter and illustrations
contained therein. Any reproduction or
utilization of its contents – in whole or in
parts – is forbidden without prior written
consent of ABB Inc.
Copyright© 2019 ABB
All rights reserved