Advertisement
Quick Links
2011 Passat interface manual
This screen is used in many Volkswagen and Skoda car types，
including the 2011 passat,tiguan, and Skoda some types. this interface can
insert 2AV and 1 RGB navigation and one reverse camera video onto the
monitor.
The features of this interface：
1． Use steering wheel keys to switch inputs and MMI control for installed
devices.
2． The original touch panel can be used for installed navigation.
3． Ultra‐reliability comes from car‐specific components which works
well from ‐40~+85C.
4． High quality video processor to give good video performance.
1.System connection
DIP
Navi RGB
AV1/2
camera
power
1
V2011.09
ＦＶ－ＰＡＳＳＡＴ－１１
This ribbon connect the
interface
daughter board inside.
Sound in/out
3 keys for
[from Below to top]
AV2‐in,
color
AV1‐in
tuning.
Audio‐out
to
the
This interface has a version
with navi inside. It has SD slot
and
15.6X9.2X3.2cm.
USB
player.
Size:
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Car Solutions FV-PASSAT-11
Summary of Contents for Car Solutions FV-PASSAT-11
- Page 1 2011 Passat interface manual V2011.09 ＦＶ－ＰＡＳＳＡＴ－１１ This screen is used in many Volkswagen and Skoda car types， including the 2011 passat,tiguan, and Skoda some types. this interface can insert 2AV and 1 RGB navigation and one reverse camera video onto the monitor. The features of this interface： 1． Use steering wheel keys to switch inputs and MMI control for installed devices. 2． The original touch panel can be used for installed navigation. 3． Ultra‐reliability comes from car‐specific components which works well from ‐40~+85C. 4． High quality video processor to give good video performance. 1.System connection Sound in/out DIP 3 keys for [from Below to top] ...
- Page 2 CAN connection：Can wires are printed on VW HU’s top label. name Car wires in above picture CAN bus wire CAN ‐ Blue/orange twisted Gray twisted CAN + white/orange twisted Blue twisted GND Black big wire black BATT or ACC Yellow big wire. Red with fuse [CAN wire wrong connection will not damage anything, an LED will be blinking when user press CD keys if correctly connected] The signal definition of 6P on interface from CAN box： ...
- Page 3 Note: when the interface is not connected, this monitor can still work because the inserted daughter board is not cut of the video signals. OEM keys to switch. 3. The user can also use the other key pad,to make interface switch: car videoinserted RGB inserted AV1 inserted AV2 car video…. The return key，will switch the interface When In ＡＶ１， ＡＶ２, the Left， Right will pop out the MMI icons. The down key，will execute the MMI operation. 4．Interface Settings The 3 side keys are : menu, +,‐ respectively. When menu is press, ...
- Page 4 The programming of IR code： There are >10 types of DVD, NAVI, and Tuners’ IR code are stored inside the interface. The installer just adjusts the options to select to wanted one, then it works. If the wanted type is not there, he may set the option to be “Prog” in the menu. When programming, switch the input to AV1, and set DIP6 down once, then the control icons will be shown, and one of the them will be blinking. Point the IR remote controller to the IR port of interface, the blinking icon will be moved to the next one. Which means one code is programmed. Repeat this step until all icons are programmed. Or: the installer can just connect the Gray wire of the 6Pin power input connector to the ir sensor of a DVD player, in this way, when the user press the ir key, the IR code is also delivered to the interface on gray wire, this can also prog the code. The programming of AV2 is the same as above. DIP switch setting: DIP ...
- Page 5 Parameters No. name parameter 1 RGB video amplitude 0.7Vpp with 75 ohm impedance NTSC resolution [400X240,480X240] of navigation is allowed. 2 sync amplitude in RGB‐navi port 3~5Vpp with 5K ohm impedance Sync should be NTSC composite with negative polarity. 3 Av1,Av2, cam video amplitude 0.7Vpp with 75 ohm impedance 4 Av1,Av2, cam standard NTSC/PAL/SECAM automatic switch 5 6 Normal work Power consumption 2.4W [0.2A @12V] 7 Standby current < 5mA 8 Standby start 10 seconds after the users switch off the CD unit. 9 Reverse trigger threshold >5V trigger The Skoda/Volkswagen Head Unit difference list:[compatibility list] Feature difference ...
Need help?
Do you have a question about the FV-PASSAT-11 and is the answer not in the manual?
Questions and answers