Electronic Control Quick Guide - U-Line 2115R Use And Care Manual

Electronic Control Quick Guide

All Models
Task Touch
Turn ON/OFF Hold 10 seconds
or
Adjust
Temperature
Touch and release
View Actual
Hold 5 seconds
Temperature
Change °F-°C Hold
Blackout
Hold 10 seconds
Mode
* Drawer Wine Cooler: Initially, top bar will flash to set to zone. After five seconds of inactivity (or touching light button), the bottom
zone (bottom bar on F flashing) can be adjusted. After five seconds of inactivity, set-point will be stored in unit.
Glass Door Models
Task Touch
Cabinet Light
Display Off
Hold
Mode
All Ice Makers
Task Touch
Ice Maker Off
Hold
Mode
Clear Ice & Clear Combo Only
Task Touch
Clean Cycle Hold
Ice Thickness
Hold
Adjustment
Temporary
Shutdown Hold
(Office Mode)
NOTE: 38°F is an example; the display will vary with actual set-point.
Factory recommended set-point is 38°F for refrigerators and beverage centers, and 50°F for wine coolers.
18
Touch
Release when °F flashes.
or
Touch to change temperature
Release when °F flashes.
Touch
Touch
Touch
IMPORTANT
2115R, 2175R
Display
or
or
Display (and cabinet light) not
operable in Blackout Mode.
Display
Display
Display
Comment
°F flashes after first touch,
set-point saved after 5
seconds of inactivity and °F
stops flashing.*
For Wine Coolers, see Use
and Care Manual.
Repeat to switch back.
Hold light for 10 seconds to
exit.
Comment
Light normally goes on/off
with door opening. Pressing
light button will turn
interior light on for 4 hours,
then it will turn off.
Display off when door is
closed (unless cabinet light is
switched on). Repeat to
switch back.
Comment
Repeat to switch back
Comment
Will automatically return to
ice production when clean
cycle is complete.
Use warmer/colder to scroll.
Ice maker will automatically
turn back on in three hours.