Never attempt to repair or perform maintenance on the unit
until the main electrical power has been disconnected.
PROBLEM
Unit not cold enough.
Check temperatures
(see introduction for
specific temperatures)
Unit is too cold.
Check temperatures
(see introduction for
specific temperatures)
No interior light
Light won't go out
when door is closed
Troubleshooting Guide
DANGER
!
POSSIBLE CAUSE
Control set too
warm
Light staying on
Airflow to front
grille blocked
Dirty condenser
coils
Door gasket not
sealing properly
Control set too cold
Loose or burned
out bulb
Light on/off switch
is turned to ON.
!
Turn control knob
CLOCKWISE to set
temperature colder:
Allow 24 hours for
temperature to stabilize
Adjust door so light
switch bracket contacts
switch plunger: See
DOOR ADJUSTMENT
Airflow must not be
obstructed to front grille.
See INSTALLATION
Clean condenser:
See CLEANING AND
MAINTENANCE
Adjust door: See
DOOR ADJUSTMENT
Turn control knob
COUNTER-CLOCKWISE
to set temperature
warmer: Allow 24 hours
for temperature to
stabilize.
Tighten or replace
bulb: See BULB
REPLACEMENT.
Turn switch to off.
See LIGHT SWITCH
AND BULB.
12
REMEDY