Display Information; Display Settings - SWAGTRON EB7 Elite Plus User Manual

5.3 Display Information

: This icon indicates cruise control's status (on/off). Maintain speed for ~7 seconds to
use this feature. Brake to turn it off.
: This icon indicates the headlight's status (on/off).
: Current speed, as measured in mph or km/h.
TRIP: These numbers show distance data for a single trip. Data is automatically cleared
when the bike is powered off.
ODO: These numbers show odometer data, i.e., cumulative distance from 0 to 6213 mi. Data accumulates in increments of 0.63
mi. If a single trip is less than 0.63 mi, it is not included in the total mileage. When data exceeds the maximum (6213 mi), the
odometer will automatically reset to zero.
TI: These numbers show time data for a single trip.
VOL: These numbers show current voltage information.
Battery Level: This icon indicates how much battery life you have left.
MODE: Displays the current speed mode (1, 2 or 3). Each mode has a different maximum
speed (throttle-only):
Mode 1 max. speed is 11.3 mph.
Mode 2 max. speed is 13.7 mph.
Mode 3 max. speed is 18.6 mph

5.4 Display Settings

Press and hold and
Adjust display brightness: Press the
buttons to adjust the brightness of the display's backlight.
Switch measurement system: Press the
buttons to set the display to the desired measurement type between imperial (miles, mph) and metric (km, km/h).
14
ENGLISH
buttons for ~2s to enter the display setting screen.
button to enter P0
button to enter P0
screen, then use and
1
2 screen, then use and
SWAGTRON EB7 Elite Plus