Buttons Information; Display Information - SWAGTRON EB-12 User Manual

• To engage Cruise Control, maintain speed for ~7 seconds. Brake to turn it off.
• Use the bell to alert pedestrians and other riders of your presence.

4.2 Buttons Information

The EB-12 eBike's display features several different elements.
: Press and hold for ~2 seconds to turn the eBike on/off. Quick-press to cycle between TRIP, VOL, TI, and ODO on-screen.
/ : Quick-press to switch between speed modes 1, 2, and 3. Or press and hold the
setting screen.

4.3 Display Information

: This icon indicates cruise control's status (i.e., on or off).
: These numbers indicate the current speed. Readings are measured in mph or
km/h.
TRIP: These numbers show distance data for a single trip. Data is automatically cleared
when the bike is powered off.
ODO: These numbers show odometer data (i.e., cumulative distance) from 0 to 6213 mi.
Data accumulates in increments of 0.63 mi. If a single trip is less than 0.63 mi, it is
not included in the total mileage. When data exceeds the maximum (6213 mi), the
odometer will automatically reset to zero.
TI: These numbers show time data for a single trip.
VOL: These numbers show current voltage information.
Battery Level: This icon indicates how much battery life you have left.
MODE 1, 2, 3: Displays the current speed mode. Each mode has its own maximum speed. Top speed for Mode 1 is 10.6 mph;
Mode 2 is 13.1 mph; and Mode 3 is 16.2 mph.
SWAGTRON EB-12 24" Electric Bike
buttons for ~2s to enter the display
13
ENGLISH