Step 1; Step 2 - modway EEI-2920 Manual

EEI –2920 Dining Chair

STEP 1:

Please put Chair Back (1) on a carpeted or padded area.
Place Chair Seat (2) to Chair Back (1) as shown.
Insert 2 piece of Bolt (A) with 2 piece of Flat Washer (B) into the holes on Chair Back (1) through the holes on
Chair Seat (2).
Use Allen Wrench (C) to tighten Bolts (A). Do not fully tighten Bolts (A) at this step.
Hardware & Tools required

STEP 2:

Put the assembled Chair Back (1) and Chair Seat (2) to Left Arm (3) as shown.
Insert 5 pieces of Bolt (A) with 5 pieces of Flat Washer (B) into the holes on Left Arm (3) through the holes on
Chair Back (1) and Chair Seat (2) .
Use Allen Wrench (C) to tighten Bolts (A). Do not fully tighten Bolts (A) at this step.
Hardware & Tools required
Page 2 of 4
Customer Service 908-368-1025︱www.modwayfurniture.com