Installation and setup
2.3
User concept
User accounts protect patient data by controlling access to the system. When passcode protection is enabled,
access is protected by a username and a numeric passcode. You can also use the analyser when passcode protection
is disabled.
• Using the analyser without passcode protection is only recommended if you do not use
patient records.
• Every user has access to the analyser with his credentials regardless which user is logged in.
The analyser supports the following levels of user account:
Edit own account
Perform a test
Manage and print measurement data
Change display brightness
Change language, date and time
Edit or reset passcode for other accounts
Add/delete and activate/deactivate other accounts
Enable/disable passcode protection
Configure network
Configure order/result interface (HIS/LIS)
Set export configuration
Install and configure printers
Approve/shedule software updates
Passcode
2.4
Status of the analyser
The light bar and the front button indicate the current activity or status of the analyser.
Front button
8
© Bosch Healthcare Solutions GmbH
Administrator
8 digits
Press
to enter standby or wake up.
to lock the analyser during a test.
Light modes
On
Analyser is in standby mode.
Off
Analyser is on.
Dimmed Analyser is in energy saving mode.
Instructions for use
Professional
4 digits