Table of Contents
Advertisement
6. Connect the handset cord:
Connect one end of the coiled handset cord to the jack on the side of the base and the other
end into the jack in the corded handset, and place the handset in the cradle.
6.4
Backup Battery Operation
If the power supply cord is not plugged into the base unit, and the battery is available, the unit
enters Battery Operation Mode. In this mode, the base is fully functional.
7
Programming the Phone
7.1
Standby Screen
The base displays the current date, time and the softkey labels.
The softkey labels will change according to the status of the unit.
The base display has a dedicated
PHONE SETTINGS - DATE/TIME
7.2
Programming Functions
The system uses a menu structure to give you access to all of the built-in features. You may
program the following items in main menu:
PHONE SETTINGS
DISPLAY SETTINGS
SOUND SETTINGS
ANSWERING SYS.
VOICE MAIL
RESTORE SETTINGS
NOTE
During programming, you may press
the main menu, or press EXIT key to exit programming and return to standby screen.
If no key is pressed for 30 seconds, the base will automatically exit programming and return to
standby screen.
7.3
Phone Settings
1.
In idle mode, press
2. Using VOL + and VOL - of the navigation button to scroll to
3. Press
SELECT
softkey and you may program the following items:
DATE/TIME
AUTO ANS INTERCOM
TONE/PULSE DIAL
AREA CODE
REMOVE HANDSET
2ND CALL ALERT
UPDATE HS LIST
7.3.1
Date/Time
From the
PHONE SETTINGS
Using VOL + and VOL - of the navigation button to scroll to DATE/TIME. Press
1.
2. The base will display the last-set time (or, if the device is new or has been reset to default, the
base will display
12:00AM
3. Using the dial pad to enter digits for the current time and date.
4. Using DIR and CID of the navigation button to move the cursor and the
AM
or PM.
the time
5. When you are finished, press
NOTE
If you subscribe to Caller ID service, the current Date/Time is set automatically when you receive
your first CID record and will override manually set Date/Time. However, the Year must still be set
14
SET CLOCK
to set the clock.
BACK
softkey at any time to exit the sub-menu and return to
MENU
softkey to go to the main menu.
menu:
01/01/11)
SAVE
softkey.
icon flashing when the clock is not set. Go to
PHONE
SETTINGS.
SELECT
softkey.
AM/PM
softkey to set
Hide quick links:
Advertisement
Table of Contents
