TurboChef 2020 Service Manual page 25

Mode 3: Warming
Mode during which the oven warms to the preset
cooking temperature defined by the cooking profile
that was selected.
Happens When...
- A selection is made from
MODE
temperature at the beginning of warmup was not
within (less than) 25°F (14°C) of the oven's set
temperature.
Goes To...
- 4 once the oven has reached the temperature
MODE
defined by the selected cooking profile.
- 6 when the user presses the back/off key
MODE
and the oven temperature is above 150°F (66°C), or
1 if the oven temperature is below 150°F
MODE
(66°C).
Mode 4: Soaking
Mode during which the oven has completed
warming up and automatically allows an additional
five minutes for the oven cavity surfaces to warm.
Happens When...
- 3 completes (within 5°F [3°C] of set point)
MODE
Goes To...
- 5 when soaking completes.
MODE
- 6 when the user presses the back/off key.
MODE
Mode 5: Cooking
Mode during which the oven is ready to cook. The
user can place food on the conveyor to cook, or edit
cook settings if the full edit or flex option is enabled.
See page 12 for more information on full edit and
flex options.
Happens When...
- 4 completes.
MODE
- The user presses the idle key, up key, down
key, or any soft key during
Goes To...
- 6 when the user presses the back/off key.
MODE
- 7 when the user presses the idle key.
MODE
- 3 if the temperature drops 25°F (14°C)
MODE
or more below the set point.
2, and the oven's
7.
MODE
Mode 6: Cooling Down
Mode during which the heater shuts off to allow the
oven to cool.
Happens When...
- The user presses the back/off key from
(and the oven temperature is above 150°F [66°C]),
or from 4, 5, or 7.
MODES
Goes To...
- 1 when the oven temperature has receded
MODE
below 150°F (66°C).
- 2 when the user selects a cooking profile.
MODE
Mode 7: Idle
Mode during which both blowers are reduced to
30% and the belt speed reduces to 20 minutes to
save power. All other oven components remain the
same.
Happens When...
-The user presses the idle key from
Goes To...
- 5 when the user presses the idle key, up
MODE
key, down key, or any soft key.
- 6 when the user presses the back/off key.
MODE
1 1
3
MODE
5.
MODE