Brew Group; Set The Brew Group In A Neutral Position - Gaggia Velasca Black Troubleshooting Manual

BREW GROUP

I cannot insert the brew group into my espresso machine

Set the brew group in a neutral position

1. Place back the coffee ground container and close the service door. NOTE: Leave the brew group out.
2. Press the power button to turn off the espresso machine
3. Wait at least 5 seconds and turn on the espresso machine.
4. Set the brew group in a neutral position before inserting it. Watch our video for clear instructions.
5. Push the black lever all the way down
6. Align the two arrows on the yellow circle
7. Push the yellow lock pin in an upwards position
8. Remove the coffee ground container, open the service door and insert the brew group.
Did this not solve the issue? Please contact us.
Check if the power cord is connected properly on the reverse side. Especially the part that goes into the machine
.