Installation References
Installing Flexible Waveguides
b
Precautions for Installing Flexible Waveguides
The flexible waveguide can be bent only within its maximum twist angle and at the side with a larger area. The E-bend radius and
H-bend radius cannot be smaller than the minimum bending radius. For details about the minimum bending radius, see the
following table.
H-Plane
Minimum
Frequency Band
H-bend radius ①
5 GHz
272 mm (10.7 inch)
6 GHz
204 mm (8.0 inch)
7/8 GHz
152 mm (6.0 inch)
10/11 GHz
127 mm (5.0 inch)
Flexible waveguide over bent
E-Plane
Minimum
Maximum
E-bend radius ②
Twist Degree
136 mm (5.4 inch)
155 (deg/m)
102 mm (4.0 inch)
214 (deg/m)
76 mm (3.0 inch)
264 (deg/m)
64 mm (2.5 inch)
310 (deg/m)
Server deformation
Waveguide deformed
because of being over bent
Keep protective covers of flexible waveguides well for future use.
18
Cracks
Waveguide damaged
because of being over bent
Protective covers for flexible waveguides