Danfuss VLT 5000 Series Manual page 22

I Motor and DC coils connections on IP 00
Motor and DC coils must be installed by the cus-
tomer by VLT 5300-5500 or VLT 6350-6550 with an
IP 00 enclosure. Minimum length of cables are sup-
plied with the VLT frequency converter.
To DC bus line
+DC 118, - DC 117
To DC bus line
+DC 89, - DC 88
22
DC bus coils
Motor coils
®
VLT 5000/6000 Series
See below drawing for the connection between DC
coils and the VLT frequency converter and motor
coils and the VLT frequency converter.
To motor
U/T1/96, V/T2/97, W/T3/98
U2/T1/119, V2/T2/120, W2/T3/121
To motor terminals on VLT
MG.56.A1.02 - VLT is a registered Danfoss trade mark