Wall Mount Installation - Kogan SMARTERHOME KASHSFP18BA User Manual

WALL MOUNT INSTALLATION

KASHSFP18BA (1800w model)
Note:
The heater MUST be installed with the minimum required distance at the four
sides of the heater.
Drill holes at each side on the wall and insert the plastic expanded plugs within. Attach the
bracket to the wall with screws.
Place the heater onto the bracket, ensuing that the
holes align.
Tighten screws on the top of bracket to secure.
To remove the heater from the bracket, pull it 5mm
outward and then move it 10mm to the left.