Advertisement
COMPONENTS
• Heater
• Wall brackets, screws and wall anchors.
• Feet x2
• Screws for feet x4
• Remote control
• User guide
INSTALLATION
Attaching the Feet
1.
Before using the heater, the feet must be fitted to the heater (unless wall
mounting).
2.
Remove the heater and the feet from the carton. The feet and mounting screws
are contained in the satchel along with this user guide.
3.
Remove the front glass panel from the heater.
4.
Place the heater on the floor with the bottom facing up. Take care of the power
switch while the heater is upside down.
5.
There are four feet mounting holes at bottom of the heater. The plastic feet have a
location post, ensure these posts are aligned and positioned in the corresponding
holes at the base of the heater, then turn feet to align with the 2 screw mounting
holes.
5
Advertisement
