Open Window Detection
•
If the room temperature remains below 5°C following a consecutive 3 minutes of use,
the heater will assume a window is open and begin monitoring the room temperature.
•
If the temperature has not risen above 5°C after an additional 7 minutes (10 minutes in
total), the heating function will be turned off to conserve energy.
•
A warning alarm will beep to notify the user, and the error code 'E4' will be shown.
•
Please note that this will not be activated during the initial 5 minutes of use.
DISPLAY
Flame colour display
Flame brightness display
Temperature
NOTE: After 10 seconds without any operation, the display will go into stand-by. Press any
buttons to illuminate.
High Heating
Low Heating
Wi-Fi