Kogan SMARTERHOME KASHSFP18BA User Manual page 10

Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (the Wi-Fi light
on the display will be flashing rapidly).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by pressing and holding the power button until the Wi-Fi light on the display is
flashing.
Add device through network
5. Once registered, tap "+" in the upper right corner of the app's home page to add a
new device through the network.
6. Select the product type from the list of options in the app (Heating & Cooling >
Heaters).
7. Ensure that the device is in pairing mode, with the Wi-Fi light flashing, and tap
"Confirm light is rapidly flashing".