Operation - Kogan SMARTERHOME KASHSFP18BA User Manual

OPERATION

CONTROL PANEL
Timer Button
Power button
•
Press to turn the appliance On and Off.
•
When the product is in standby, press and hold the Power button for 3 seconds to
perform WIFI reset. Use this to place the product in SmarterHome pairing mode.
•
When the product is in operation, press and hold the power button for 5 seconds to
change from Celsius (°C) or Fahrenheit (°F).
Flame button
•
Tap to adjust the Flame brightness between 5 (High) and 1 (Low).
•
Hold for 3 seconds and then tap to change the flame colours (C1 - C7).
C1
C2 Warm White + Red
C3 Red + Blue
C4 Warm White + Blue
Heat button
•
Press to change between the different levels of heating. The chosen level will be
shown on the Heating Level indicator. When the lower bar is illuminated, the fire is
running at Low, when both bars are illuminated, the fire is running at High.
•
Hold the button for 3 seconds, then tap to select the desired temperature (18 - 35°C).
Timer button
•
A power-on timer can be set by repeatedly pressing the timer button while the unit is
in standby; this can be set from 0 hours to 9 hours in one-hour intervals.
Timer
Heat Button
Warm White + Red + Blue
Heat Flame
Flame Button
Power Button
C5 Blue
C6 Red
C7 Warm White
Power