Multi-Function Display; Special Procedures - Polaris SLT780 1996 Owner's Safety And Maintenance Manual

Table of Contents

Advertisement

SPECIAL PROCEDURES
Multi-Function Display
The
Polaris multi-
function display al-
lows you to see such
important information
as time run, distance
run, maximum speed,
current speed, fuel
level and more at the
touch of a button. Fol-
lowing is a summary
of operating instruc-
tions for this feature.
Operation and Modes
HOUR: Secondary display function controls multi-LCD when selected by mode
key. HOUR annunciator is on when in HOUR mode. Actual engine run hours are
displayed in .I hour increments from 0 to 999.9 hours. HOURS can be neither re-
set nor lost when power is removed due to nonvolatile EEPROM memory.
CLOCK: CLOCK is a secondary display function and controls multi-LCD when se-
lected by mode key. CLOCK annunciator is on when in CLOCK mode. To set the
time, first enter CLOCK mode and then hold the SET key for 4 seconds to enter
CLOCK SET mode. Both keys are now used to adjust the time. MODE selects the
digit, SET advances the digit. Press MODE when complete to startthe clock (colon
begins to flash).
PEAK SPEEDIRPM: While in TACH mode, pressing the SET key will display both
the peak speed and maximum sustained RPM since the last reset or auto-off oc-
curred. While displayed, holding the SET key for 4 seconds will reset the peak me-
mories.
Key Functions and Display
MODE KEY: Toggles multi-LCD display modes as pressed. Annunciators scroll
from left to right to indicate selection.
SET KEY: Function varies with selected mode. Used to temporarily disable warn-
ing indications, to access peak speed and RPM while in TACH mode, reset dis-
tance in DlST mode, select MPH
-
Km/H while in VOLT mode, and to set time while
in CLOCK mode.
LCD DISPLAY: Displays variety of both essential and performance data: speed,
RPM, fuel level, oil level, trim position, distance, voltage, engine hours, clock, peak
speed, peak RPM, and warning conditions (low fuel, low oil, low power, high tem-
perature).
WARNING LED: Super bright LEDflashes to alert rider of warning condition. Actu-
al condition is then displayed in multi-LCD readout.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

0964588

Table of Contents