Symptom
ERROR
MESSAGES:
Indicates that the
S1 L
LUBE
accumulated distance
is such that the deck
needs to be lubed
Indicates that the
S2 C
CLEAN
accumulated distance
is such that the
machine needs to be
cleaned.
Indicates that the
S3 M
MOTOR
accumulated time on
the treadmill is such
that the motor brushes
need to be
changed/checked.
Cannot read speed
E5 S
SPEED
sensor
SENSOR
Incline reading not
E1 S
STALL
changing when
commanded
Incline reading has
E1 I
INCLINE
changed without the
incline being
commanded.
Maximum or
E1 R
RANGE
minimum elevation
out of calibrated
ranges
Support Services 800-883-8783
Probable Cause
Mon-Fri 8:30am-5:00pm Central Time Zone
Corrective Action
•
Lube deck with True Fitness liquid
silicone lubricant. Inspect wax bar
assembly on commercial models, if
worn to less that ¼ inch in thickness-
replace wax bar.
•
Remove motor cover and vacuum dust
from area. Wipe down the exposed area
of the deck beside the straddle covers
with a clean, dry cloth.
•
Check/Replace motor brushes as
needed.
•
Reset timer.
•
Perform Speed Sensor Test page 21
•
See Elevation Not Functional page 9.
•
See Elevation Not Functional page 9.
•
See Elevation Not Functional page 9.
Recommended Tools
Liquid silicone single
use pack
Liquid Silicone
Applicator.
Vacuum
Shop towel
Fax: 636-272-7148
Page 3