Ec Declaration Of Conformity - Husqvarna 525HE3 Operator's Manual

EC Declaration of Conformity

Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:
+46-36-146500, declares that the hedge trimmers
Husqvarna 525HE3, 525HE4 with serial numbers dating
from 2020 onwards (the year is clearly stated on the
rating plate, followed by the serial number), comply with
the requirements of the COUNCIL'S DIRECTIVE:
• of May 17, 2006 "relating to machinery" 2006/42/EC
• of February 26, 2014 "relating to electromagnetic
compatibility" 2014/30/EU
• of May 8, 2000 "relating to the noise emissions in the
environment" 2000/14/EC. Conformity assessment
according to Annex V.
• of June 8, 2011 "on the restriction of the use of
certain hazardous substances in electrical and
electronic equipment" 2011/65/EU.
The following standards have been applied:
EN ISO 12100:2010, EN ISO 10517:2009/A1:2013, ISO
14982:2009, CISPR 12:2009, EN 50581:2012.
RISE SMP Svensk Maskinprovning AB, Box 7035,
SE-750 07 Uppsala, Sweden, has performed voluntary
type examination on behalf of Husqvarna AB. The
certificate has the number: SEC/20/2543.
In addition, RISE SMP Svensk Maskinprovning AB, Box
7035, SE-750 07 Uppsala, Sweden, has evaluated
conformity with Annex V of Council's Directive of May 8,
2000 "relating to noise emissions in the environment"
2000/14/EC. The certificate has the number:
01/094/030. For information relating to noise emissions,
Technical data on page 16 .
refer to
Huskvarna, 2019-12-15
Per Gustafsson, Development Manager (Authorized
representative for Husqvarna AB and responsible for
technical documentation)
18
EC Declaration of Conformity
1173 - 001 -