Advertisement
Revolabs Single Channel System — LifeSize Team MP Setup Guide
This setup guide will guide you through the steps needed to properly connect a
Revolabs Single Channel System to a LifeSize Team MP video codec.
It is important to carefully follow these instructions in order and completely.
Note:
Otherwise your Single Channel System and/or the video codec may not function
properly. Please read through these instructions completely before proceeding.
Contact Revolabs technical support if you have any questions.
Requirements for connecting systems:
1. Revolabs Single Channel System
2. LifeSize Team MP video codec
3. QTY 1 2.5mm to RCA adapter cable (provided with Single Channel System)
Advertisement
Table of Contents
Related Manuals for Revolabs LifeSize Team MP
Summary of Contents for Revolabs LifeSize Team MP
- Page 1 Revolabs Single Channel System — LifeSize Team MP Setup Guide This setup guide will guide you through the steps needed to properly connect a Revolabs Single Channel System to a LifeSize Team MP video codec. It is important to carefully follow these instructions in order and completely.
- Page 2 Connecting the Cables 1. Connect the 2.5mm to RCA adapter cable from the 2.5mm AUDIO port on the Single Channel System to the L AUDIO IN port on the LifeSize Team MP Configuring the LifeSize Team MP Video Codec 1. Push the BLUE button on the remote control for SYSTEM MENU 2.
Need help?
Do you have a question about the LifeSize Team MP and is the answer not in the manual?
Questions and answers