Login Web Interface - Huawei IPC6091-P360 Quick Start Manual

IPC6091-P360
Quick Start Guide
Step 6 Click Save to complete modification of device IP address.
----End

6.3 Login Web Interface

Step 1 Open IE browser, enter the modified camera IP address into the address bar and then press
Enter button.
Please operate according to the interface prompt if the interface displays guide of Online
Upgrade.
Step 2 Enter username and password, click Login.
Step 3 For the first login, click Please click here to download and install the plug-in., install
controls according to system prompt.
The main interface will be shown in
Figure 6-4 Web Interface
----End
Issue 01 (2019-02-22)
NOTE
l Click on the right of corresponding camera in the device list, you can switch the preview
stream, please select according to the actual situation.
l and represent substream 1 and substream 2 respectively;
Copyright © Huawei Technologies Co., Ltd.
Figure 6-4 after control installation is completed.
6 Network Configuration
represents mainstream.
18