Fix Mounting Bracket; Install Adapter Block - Huawei IPC6091-P360 Quick Start Manual

IPC6091-P360
Quick Start Guide
Figure 5-2 Installation diagram

5.2.1 Fix Mounting Bracket

Step 1 Mark the mounting hole sites on the surface according to the installation holes of the device
pedestal and dig holes on the surface, insert the expansion bolts into the holes you just dug.
Step 2 Pull the device external cable (network cable without crystal connector) out from the
installation bracket.
Step 3 Align the installation holes of the bracket pedestal with the installation hole sites on the
surface, and then insert the expansion bolts into the bracket pedestal and lock them firmly.
----End

5.2.2 Install Adapter Block

Pull the device external cable through the adapter block and twist it into the installation
bracket, then use the locking screw to tighten it firmly.
Issue 01 (2019-02-22) Copyright © Huawei Technologies Co., Ltd.
5 Device Installation
12